Call recordings

Atención

Beware that local legislation may enforce to announce that the call is being recorded (sometimes to both parties). You should include a recording disclaimer in your welcome locutions for DDIs with automatic recording enabled.

IvozProvider supports two different ways of recording calls:

  • Automatic recordings for the incoming/outgoing calls that use a External DDI.
  • On demand recordings requested by a user during a call.

Automatic DDI recordings

In this type of recording, the whole conversation will be recorded: from the start until it finishes.

Two different scenarios:

  • Incoming calls to a DDI: The call will continue until the external dialer hangups (no matter whom is talking to).
  • Outgoing calls using a DDI as Outgoing DDI: the recording will continue as long as the external destination keeps in the conversation.

Atención

Take into account that the call will be recorded while the external entity is present, even it the call is being transferred between multiple users of the platform.

Record all the calls of a DDI

To enable this feature, edit the DDI and configure the field under the section recording data:

There are 4 available options:

  • Disable recordings
  • Enable incoming recordings
  • Enable outgoing recordings
  • Enable all call recordings

On demand recordings

The on-demand recordings must be enabled by the brand administrator for the clients that request it. This can be done in the client edit screen:

Advertencia

Contrary to the Services mentioned in the previous section, the on demand record are activated within a conversation.

Contrary to automatic ones, on demand recording can be stopped using the same process that started them.

Activated using the Record key

Some terminals (for example, Yealink) support sending a SIP INFO message during the conversation with a special Record header (see reference). This is not a standard for the protocol, but being Yealink one of the supported manufacturers of the solution, we include this kind of on-demand recording.

Importante

For this recording requests, the configured code doesn’t matter but the client still must have on demand records enabled.

To start or stop this kind of recordings, just press the Record key in the terminal and the system will handle the sent message.

Activated using DTMF codes

The more traditional approach for this feature is to press a combination of keys during the call. Some notification will be played and the recording will start or stop. This combination is sent to the system using DTMF tones using the same audio stream that the conversation (as mentioned in RFC 4733).

IvozProvider supports this kind of on demand record activation but with an important downside. In order to capture this codes, the pbx must process each audio packet to detect the code, avoiding the direct flow of media between the final endpoints.

Importante

Enabling this record mode highly affects the performance of the platform. Use at your own risk.

Recordings list

The client administrator can access to all the recordings in the section Client configuration > Calls > Call recordings:

  • Recordings can be heard from the web or downloaded in MP3 format.
  • If the recording has been started on demand, it will also include the user that requested it.

Truco

Recording removal button is shown only if Allow Client to remove recordings is enabled for the client in Client configuration.