Automatic ISO CD imageΒΆ

You can download one of the IvozProvider Automatic ISO CD images (generated using simplecdd) in stable or nightly versions:

Important

IMPORTANT: Automatic install CDs will format target machine disk!

  • Configure the target machine to boot from CD. It will display the Debian GNU/Linux installation menu.

Note

You can use graphic installation if you prefer, but the following screenshots show the standard installation.

../../_images/installcd-intro.png
  • Choose installation language:
../../_images/installcd-language.png
  • Choose location:
../../_images/installcd-location.png
  • Set root password
../../_images/installcd-rootpass.png
  • Choose date and time configuration:
../../_images/installcd-clock.png

Note

At this point, a generic network configuration and disk partitioning will be performed, and also a installation of base system.

  • Setup MySQL Server root password
../../_images/installcd-mysqlpass.png

Important

MySQL password must be set in this screen and again in the following Ivozprovider configuration menu. If you leave this field empty, the default password will be used (see below).

  • Configure IvozProvider:
../../_images/installcd-ivozmenu.png

As mentioned in Minimum requirements is required at least one public IP address for User and Trunk SIP proxies. Remember that if you use only one, KamTrunks will use different SIP ports to avoid collision.

You can set its addresses right now and configure the interfaces properly when the system is fully installed. This menu can be displayed anytime after the installation.

../../_images/installcd-proxyaddr.png

You can also configure default root MySQL password right now.

Note

If you don’t configure MySQL password, default password will be used (changeme). You can still change it later.

../../_images/installcd-mysql.png

And default language for portals:

../../_images/installcd-portallang.png

Note

It is not require to configure all settings during initial installation. In case any setting has been left without configuration a warning dialog will be displayed.

../../_images/installcd-warning.png

At last, select where the GRUB boot loader will be installed.

../../_images/installcd-grub.png

After the reboot, you are ready to access using the web portals!

Important

Any of the public IP addresses configured during the installation will work to access the web portal. Default credentials are admin / changeme.